Guitar Hero Drums Pads Double Hits Fix
WHAT YOU WILL NEED:
After openning the drums you will find the piezo discs.
(in the pics that you will see ive removed the pad from my old drums,in your drums your only going to remove the piezo disc and DO NOT CUT ANY WIRE BE CAREFUL )
REMOVE THE PIEZO WITH THE KNIFE(do not bend the disc)
after removing the peizo in the pad you will see some sticky white thing remove the with your finger and do the same for the piezo <<<<best way to do it!
NOW CUT THE SPONGE AS THE SHAPE OF THE PIEZO(the sponge must be thick if not double it)
THEN PUT ALOOT OF GLUE ON BOTH SIDES!
NOW COVER THE PEIZON WITH ELECTRICAL TAPE AND PUT ALOT OF GLUE IN THE DOWN SIDE(watch out for the wires the important thing is the down side is covered )
NOW PUT THE SPONGE ON PAD AND PUT THE PIEZO ON IT AND PUSH FOR 5SC (make sure to put it on the pad ring)
AND THATS IT!
IT SHOULD LOOK SOMETHING LIKE THIS:
WHAT YOU WILL NEED:
After openning the drums you will find the piezo discs.
(in the pics that you will see ive removed the pad from my old drums,in your drums your only going to remove the piezo disc and DO NOT CUT ANY WIRE BE CAREFUL )
REMOVE THE PIEZO WITH THE KNIFE(do not bend the disc)
after removing the peizo in the pad you will see some sticky white thing remove the with your finger and do the same for the piezo <<<<
NOW CUT THE SPONGE AS THE SHAPE OF THE PIEZO(the sponge must be thick if not double it)
THEN PUT ALOOT OF GLUE ON BOTH SIDES!
NOW COVER THE PEIZON WITH ELECTRICAL TAPE AND PUT ALOT OF GLUE IN THE DOWN SIDE(watch out for the wires the important thing is the down side is covered )
NOW PUT THE SPONGE ON PAD AND PUT THE PIEZO ON IT AND PUSH FOR 5SC (make sure to put it on the pad ring)
AND THATS IT!
IT SHOULD LOOK SOMETHING LIKE THIS:
No comments:
Post a Comment