Guitar Hero Drums Cymbal Fix

Guitar Hero Drums Cymbal Fix

(IM USING AN OLD GUITAR HERO CYMBAL ,IN YOUR CYMBAL YOU WILL SEE THE BOARD WITH TI WIRES CONNECTED TO THE PIEZO WATCH OUT FOR THE WIRES AND DO NOT CUT THEM)

WHAT YOU WILL NEED:

AFTER OPENNING THE CYMBAL(to open the cymbal unscrew the 4 screws in the back with +screw driver)

you will find the piezo disc
REMOVE IT WITH A KNIFE(do not bend it)

NOW REMOVE THE WHITE STICKY THING WITH YOUR FINGER



NOW CUT THE SPONGE(the sponge must be thick if not double it) AS THE SHAPE OF THE PIEZO AND PUT ALOT OF GLUE ON THE BOTH SIDES!

NOW COVER THE PIEZO WITH ELECTRICAL TAPE AND COVER THE DOWN SIDE WITH ALOT OF GLUE (watch out for the wires the important thing is the down side is covered)

NOW PUT THE SPONGE AND PUT IT IN THE CYMBAL AND THEN PUT THE PIEZO ON IT
AND PUSH THEM FOR 5SC



NOW IF YOUR CYMBAL IS NOT SENSITIVE APPLY THE TAPE ON THE PIEZO (see pic)
IF IT GOT TOO SENSITIVE JUST PUT THE TAPE IN ONE HALF IN THE PIEZO

NOW CUT SOME SPONGES LIKE THIS

AND PUT THEM ON THE TOP OF THE PIEZO AND CLOSE THE CYMBAL

NOW TAKE ANOTHER SPONGE AND PUT IT ON THE BIG HOLE THEN PLACE IT ON THE DRUMS


NOW TAKE ANOTHER SPONGE AND PUT IT IN THE PLACE OF COLORED RING THEN PUT THE RING BACK AND TIGHT IT